EPOXY GROUTS & MORTARS

EPOXY-BASED GROUTS

EGI

EGI is a low viscosity epoxy resin specifically designed for the injection of cracks generally from 0.1mm to 10mm wide. It is a high performance material which gives an excellent bond to concrete, brickwork, stonework etc., and therefore permanently seals and structurally bonds such substrates.

 

 

EGP

EGP is a three pack high flow epoxy grout, with excellent low temperature curing characteristics, making it suitable for underplate grouting applications such as crane rails, machine base plates, bridge bearing pads and stanchion bases. The properties of EGP are achieved by blending modified epoxy resins to form a base component, which is activated by a formulated amine hardener. The filler component is a blend of limestone and silica sands. The mixed material has high flow properties, allowing it to be either poured under gravity or pumped into place.

 

 

EGM

EGM is a three pack epoxy mortar. Its high strength and non-shrink characteristics make it ideally suited for filling of potholes, repairing spalled steps, bedding kerbs, and pre-forming machine plinths and bearing pads. The properties of EGM are achieved by blending modified epoxy resins to form a base component, which is activated by a formulated amine hardener. The inert filler component is a blend of graded silica sands and limestone.

 

 

EGT

EGT is a two component low viscosity but thixotropic epoxy resin specifically designed for the injection into cracked substrates, generally from 0.5mm to 20mm. The thixotropy of the resin ensures that in most instances the injection resin will not drain away from the injected area, but is sufficiently low in viscosity to be injected into narrow cracks.

EGT is a high performance material which gives an excellent bond to concrete, brickwork, stone etc., and therefore permanently seals and structurally bonds such substrates

 

 

 

 

EP SCREED

EP Screed is a high performance impermeable composition specifically designed to give resistance to impact and abrasion in chemically aggressive environments. It is easy to apply and cures to provide a jointless, easily cleaned surface, which has a degree of slip resistance.

EP Screed consists of a blend of a low viscosity epoxy binder with a silica aggregate of optimum grading. The screed can be applied at 3mm thickness to vertical surfaces.

 

 

 

 

 

 

2K Adhesive Systems Limited, Venture Crescent,

Alfreton, Derbyshire.

DE55 7RA,

United Kingdom

Copyright 2015

> T: +44 (0) 1773 54 0440

> F: +44 (0) 1773 60 7638

> E: info@2kas.net